HIKVISION HWN-4108MH-8P - Page 50

Congure Event Recording
You can congure the recording triggered by the moon detecon, line crossing detecon, and
intrusion
detecon.
Steps
1.
Go to Conguraon → Event → Smart Event .
2.
Congure the event detecon and select the channels to trigger the recording when an event
occurs.
3.
Go to
Conguraon → Record → Parameter .
4.
Set the connuous main stream/sub-stream recording parameters for the camera. Refer to
Congure Recording Parameter for details.
5.
Go to Conguraon → Record → Schedule .
6.
Select recording type as Event. Refer to Edit Schedule for details.
Edit Schedule
Steps
1.
Go to
Conguraon → Record → Schedule .
Figure 5-13 Recording Schedule
Connuous
Connuous recording.
Network Video Recorder User Manual
37