HIKVISION HWN Series User Manual

Network Video Recorder User Manual
44
NTP Server
IP address of the NTP server.
4. Click Apply.
6.2.5 Log Server Settings
Upload Logs to the Server
You can upload system logs to the server for backup.
Steps
1. Go to Configuration → Network → General → Log Server Settings.
Figure 6-7 Log Server Settings
2. Turn on Enable
3. Set Upload Time Interval, Server IP Address, and Port.
4. Optional: Click Test to test if parameters are valid.
5. Click Apply.
One-Way Authentication
You can install a CA certificate (from the server) to your device to authorize the server via web
browser. It would improve the log communication security.
Before You Start
● Download the CA certificate from the server.
● Ensure log server parameters are valid.
Steps
1. Go to Configuration → Network → Advanced Settings → Log Server Configuration.

HIKVISION HWN Series Specifications

General

Model Series	HWN Series
Video Input	IP Video Input
Video Output	HDMI, VGA
Operating System	Embedded Linux
Type	NVR
Channels	Varies by model (4/8/16/32/64)
Recording Resolution	Up to 12MP
Resolution	Varies by model
Hard Drive Support	Yes
HDD Slots	Varies by model (1/2/4/8)
Max HDD Capacity	Up to 10TB per HDD
Network Interface	RJ45 10/100/1000Mbps
USB Interface	USB 2.0, USB 3.0
Operating Temperature	-10°C to +55°C (14°F to 131°F)
Operating Humidity	10% to 90%
Dimensions	Varies by model
Weight	Varies by model
Category	Network Video Recorder (NVR)
Power Supply	12 VDC