HIKVISION HWN Series User Manual

Network Video Recorder User Manual
48
6.2.7 Hik-Connect
Go to Configuration → Network → Platform Access. Refer to Hik-Connect for details.
6.2.8 Email
Go to Configuration → Network → Email. Refer to Email for details.
6.3 Camera Management
6.3.1 Network Camera
Add Automatically Searched Online Network Camera
Add the network cameras to your video recorder.
Before You Start
● Ensure your network camera is on the same network segment with your video recorder.
● Ensure the network connection is valid and correct.
● Ensure the network camera password is the same as your video recorder.
Steps
1. Go to Configuration → Camera → Camera.
2. Click Online Device List. The online cameras on the same network segment will be displayed in
the list.
Figure 6-11 Online Device
3. Optional: Click Edit IP to edit camera IP addresses in batch. The system will allocate IP addresses
to the selected cameras in order.
Note
Ensure the selected cameras are activated.
4. Select a network camera, and click Add to add it.

HIKVISION HWN Series Specifications

General

Model Series	HWN Series
Video Input	IP Video Input
Video Output	HDMI, VGA
Operating System	Embedded Linux
Type	NVR
Channels	Varies by model (4/8/16/32/64)
Recording Resolution	Up to 12MP
Resolution	Varies by model
Hard Drive Support	Yes
HDD Slots	Varies by model (1/2/4/8)
Max HDD Capacity	Up to 10TB per HDD
Network Interface	RJ45 10/100/1000Mbps
USB Interface	USB 2.0, USB 3.0
Operating Temperature	-10°C to +55°C (14°F to 131°F)
Operating Humidity	10% to 90%
Dimensions	Varies by model
Weight	Varies by model
Category	Network Video Recorder (NVR)
Power Supply	12 VDC