HIKVISION HWN Series User Manual

Network Video Recorder User Manual
74
Configure HDD Quota
Each camera can be configured with an allocated quota for storing videos.
Steps
Note
This function is only available for certain models.
1. Go to Configuration → Record → Storage Mode.
2. Set Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in Record Capacity.
Figure 6-31 Quota
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to activate the new settings.
6.5.5 Advanced Settings
Steps
1. Go to Configuration → Record → Advanced.
2. Configure the parameters as your desire.
Overwrite
● Disable: When the HDD is full, video recorder will stop writing.
● Enable: When hard drive is full, video record will continue to write new files by deleting the
oldest files.

HIKVISION HWN Series Specifications

General

Brand	HIKVISION
Model	HWN Series
Category	Network Hardware
Language	English