HIKVISION HWN Series User Manual

Network Video Recorder User Manual
54
Configure Channel Type
You can disable a PoE channel to additionally increase a normal IP channel resource.
Go to Configuration → Camera → Camera → PoE Binding Configuration, and set the PoE channel
as your desire.
Figure 6-16 PoE Binding Configuration
Sort Channel Order
Go to Configuration → Camera → Camera. Refer to Sort Channel Order for details.
Import/Export IP Camera Configuration File
The information of added network camera can be generated into an excel file and exported to the
local device for backup, including the IP address, port, password of admin, etc. And the exported
file can be edited on your computer, like adding or deleting the content, and copy the setting to
other devices by importing the excel file to it.
Before You Start
Connect a backup device, such as a USB flash drive, to your video recorder.
Steps
1. Go to Configuration → Camera → Camera.
2. Click More.
3. Click Export/Import to export/import configuration files to the connected backup device.
4. Set the storage device and folder path.
5. Click Export/Import.
What to do next
After the importing process is completed, you must restart the video recorder.

HIKVISION HWN Series Specifications

General

Model Series	HWN Series
Video Input	IP Video Input
Video Output	HDMI, VGA
Operating System	Embedded Linux
Type	NVR
Channels	Varies by model (4/8/16/32/64)
Recording Resolution	Up to 12MP
Resolution	Varies by model
Hard Drive Support	Yes
HDD Slots	Varies by model (1/2/4/8)
Max HDD Capacity	Up to 10TB per HDD
Network Interface	RJ45 10/100/1000Mbps
USB Interface	USB 2.0, USB 3.0
Operating Temperature	-10°C to +55°C (14°F to 131°F)
Operating Humidity	10% to 90%
Dimensions	Varies by model
Weight	Varies by model
Category	Network Video Recorder (NVR)
Power Supply	12 VDC