HIKVISION iDS-TCH44P-B

6.
Click Save.
3.2.4 Set Capture Overlay
If you want to overlay informaon on the captured pictures, set capture overlay.
Steps
Note
The supported parameters vary with dierent channels. The actual interface prevails.
1.
Go to Conguraon → Device Conguraon → Text Overlay → Capture Overlay Conguraon .
2.
Select a channel.
3.
Check Capture Picture Overlay.
Figure 3-5 Set Capture Overlay
4.
Set the percentage, font size, color, etc.
Percentage
It is the percentage that the overlaid informaon occupies on the picture. For example, if you
set the percentage to 50, the overlaid
informaon in a row will occupy up to half of the image
width, and the excess content will be overlaid from a new line.
Overlay Number Zeroizing
Network Trac Camera (Mul-lens LPR Camera) User Manual
10