HIKVISION iDS-TCH44P-B

Chapter 10 Safety Management
10.1 Manage User
The administrator can add, modify, or delete other accounts, and grant dierent permissions to
dierent user levels.
Steps
1.
Go to Conguraon → Device Conguraon → User Management .
2.
Add a user.
1) Click Add.
2) Enter User Name and select Level.
3) Enter Admin Password, Password, and
conrm the password.
Cauon
To increase security of using the device on the network, please change the password of your
account regularly. Changing the password every 3 months is recommended. If the device is
used in high-risk environment, it is recommended that the password should be changed every
month or week.
4) Assign remote permission to users based on needs.
User
Users can be assigned permission of viewing live video and changing their own passwords,
but no permission for other
operaons.
Operator
Operators can be assigned all permission except for operaons on the administrator and
creang accounts.
5) Click OK.
Note
The administrator can add up to 31 user accounts.
3.
You can do the following operaons.
-
Select a user and click Modify to change the password and permission.
-
Select a user and click Delete to delete the user.
10.2 Enable User Lock
To raise the data security, you are recommended to lock the current IP address.
Steps
1.
Go to Conguraon → Device Conguraon → System Conguraon → Service .
2.
Check Enable User Lock.
Network Trac Camera (Mul-lens LPR Camera) User Manual
44