HIKVISION iDS-TCH44P-B User Manual

Chapter 5 Record and Capture
5.1 Set Storage Path
5.1.1 Set Storage Card
If you want to store the les to the storage card, make sure you insert and format the storage card
in advance.
Before You Start
Insert the storage card to the device.
Steps
1.
Go to
Conguraon → Device Conguraon → Encoding and Storage → Storage Management .
Figure 5-1 Set Storage Card
2.
Format the storage card in two ways.
-
Check the storage card, and click Format to format it manually.
Note
For the newly installed storage card, you need to format it manually before using it normally.
-
If you want to format the storage card automacally when the card is abnormal, check Auto-
Inialize
Redundant Storage.
3.
Oponal: If the device has been connected to the plaorm, and you want to upload the storage
card
informaon automacally, check Auto-Upload Data in Redundant Storage.
4.
Click Save.
Network Trac Camera (Mul-lens LPR Camera) User Manual
21

HIKVISION iDS-TCH44P-B Specifications

General

Brand	HIKVISION
Model	iDS-TCH44P-B
Category	Security Camera
Language	English