HIKVISION iDS-TCH44P-B

When the overlaid number digits are smaller than the xed digits, 0 will be overlaid before
the overlaid number. For example, the xed digits for lane No. is 2. If the lane No. is 1, 01 will
be overlaid on the picture.
5.
Select the overlay
informaon from the list.
Note
The overlay informaon varies with dierent models. The actual device prevails.
6.
Set the overlay informaon.
Set Type You can edit the type.
Set Overlay
Informaon
For some informaon types, you can edit the detailed informaon.
Set Overlay Posion If you select Overlay on the Picture, you can check it. Then the
current informaon will be displayed from a new line.
Set Space Edit the number of spaces between the current informaon and the
next one from 0 to 255. 0 means there is no space.
Set Line Break
Characters
Edit the number of characters from 0 to 100 between the current
informaon line and the previous informaon line. 0 means no line
break.
Adjust overlay
sequence
Click / to adjust the display sequence of the overlay
informaon.
7.
Click Save.
3.2.5 Set Composite Picture Overlay
If you want to overlay informaon on the composite pictures, set composite picture overlay.
Steps
Note
The funcon is only available for Channel 1.
1.
Go to Conguraon → Device Conguraon → Text Overlay → Composite Picture Overlay
Conguraon .
2.
Check Picture Overlay Text.
Network Trac Camera (Mul-lens LPR Camera) User Manual
11