HIKVISION iDS-TCH44P-B

Before You Start
Install the storage card.
Steps
1.
Go to
Conguraon → Device Conguraon → Encoding and Storage → Storage Management .
2.
Set Capture Quota Rao and Video Quota Rao according to the actual needs.
Note
The percentage sum of the capture and video quota rao should be 100%.
3.
Click Save.
What to do next
Format the storage card
aer the sengs.
5.3 Set Record Schedule
Set record schedule to record video automacally during congured me periods.
Before You Start
Install the storage card, and the video quota rao is not 0.
Steps
1.
Go to Conguraon → Device Conguraon → Encoding and Storage → Record Schedule .
Figure 5-5 Set Record Schedule
Network Trac Camera (Mul-lens LPR Camera) User Manual
25