HIKVISION iDS-TCH44P-B

5.1.4 Set Cloud Storage
Cloud storage is a kind of network storage. It can be used as the extended storage to save the
captured pictures.
Before You Start
●
Arrange the cloud storage server.
●
You have enabled level 1 arm in Real-Time Status and
Trac Flow Stascs.
Note
The real-me status and trac ow stascs should be used with dedicated plaorm.
Steps
1.
Go to Conguraon → Device Conguraon → Encoding and Storage → Cloud Storage .
Figure 5-4 Set Cloud Storage
2.
Check Enable.
3.
Select Version.
4.
Set the server parameters.
1) Enter Access Server IP Address and Port No.
2) If you select V2.0, enter accessKey and secretKey of the resource pool.
Note
If you select V1.0, enter User Name and Password.
3) Enter the ID according to the storage area No. of the server.
5.
Click Save.
5.2 Set Quota
Set the video and picture rao in the storage.
Network Trac Camera (Mul-lens LPR Camera) User Manual
24