HIKVISION iDS-TCH44P-B

White Balance
It is the white rendion funcon of the device used to adjust the color temperature according
to the environment.
WDR Mode
Wide Dynamic Range (WDR) can be used when there is a high contrast of the bright area and
the dark area of the scene.
Select WDR Switch and set corresponding parameters according to your needs.
On
Set WDR Level. The higher the level is, the higher the WDR strength is.
Time
Enable WDR according to the set
me period and level.
Brightness
Set Light Threshold and WDR Level. When the brightness reaches the threshold, WDR will
be enabled.
Brightness Enhancement at Night
The scene brightness will be enhanced at night automacally.
Enable Defog
Enable defog to get a clear image in foggy days.
Image Rotaon
The image can be rotated in the set degree.
Note
Changes to the image rotaon degree will take eect aer you reboot the unit.
Light Compensaon on License Plate
Check it to realize light compensaon on license plates. The higher the sensivity is, the
easier this funcon can be enabled.
Enable Gamma Correcon
The higher the gamma correcon value is, the stronger the correcon strength is.
Brightness
It refers to the max. brightness of the image.
Contrast
It refers to the contrast of the image. Set it to adjust the levels and permeability of the image.
Shuer Speed
If the shuer speed is quick, the details of the moving objects can be displayed beer. If the
shuer speed is slow, the outline of the moving objects will be fuzzy and trailing will appear.
Gain
Network Trac Camera (Mul-lens LPR Camera) User Manual
30