HIKVISION IDS-TCM403-AI/0832 User Manual

Network Traffic Camera • User Manual
3
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Safety Instructions
Laws and
Regulations
Use of the product must be in strict compliance with the local laws and
regulations. Please shut down the device in prohibited area.
Power Supply

Use of the product must be in strict compliance with the local electrical
safety regulations.

Use the power adapter provided by qualified manufacturer. Refer to the
product specification for detailed power requirements.

It is recommended to provide independent power adapter for each device
as adapter overload may cause over-heating or a fire hazard.

Make sure that the power has been disconnected before you wire, install,
or disassemble the device.

DO NOT directly touch exposed contacts and components once the device
is powered up to avoid electric shock.

DO NOT use damaged power supply devices (e.g., cable, power adapter,
etc.) to avoid electric shock, fire hazard, and explosion.

DO NOT directly cut the power supply to shut down the device. Please shut
down the device normally and then unplug the power cord to avoid data
loss.

DO NOT block the power supply equipment to plug and unplug
conveniently.

Make sure the power supply has been disconnected if the power adapter is
idle.

Make sure the device is connected to the ground firmly.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

HIKVISION IDS-TCM403-AI/0832 Specifications

General

Brand	HIKVISION
Model	IDS-TCM403-AI/0832
Category	Security Camera
Language	English