Network Traffic Camera • User Manual
46
Brightness: Active WDR function automatically. Set the brightness threshold.
WDR Level: higher level means stronger effect.
Select Iris Mode. Auto and Manual are selectable.
Adjust Brightness Enhancement at Night. It ranges from 0 to 100.
(Optional) Check Enable Defog. You can enable the defog function when the environment is
foggy and the image is misty. It enhances the subtle details so that the image appears clearer.
(Optional) Check Light Compensation on License Plate. Adjust the sensitivity to 0 to 100 if you
enable the function.
(Optional) Check Enable Gamma Correction, and adjust the correction level from 0 to 100.
Gamma correction can enhance picture contrast, but bring noise at the same time.
(Optional) Check Enable Light Compensation Correction to adjust the license plate brightness
automatically if the license plate or scene brightness cannot be adjusted via supplement light.
And adjust Correction Level from 0 to 100.
(Optional) Check Enable Black and White Mode at Night. When ICR is in night mode, you can
check Enable Black and White Mode at Night to keep the video in black and white mode.
(Optional) Click Capture Test to test the effects after you complete the adjustment.
(Optional) Reboot the device if you enable image rotation. For other parameters, they will take
effect in real time.
Configure Video
Purpose:
The camera supports dual-shutter. One shutter for video image and the other one for capture
image. You can configure shutter parameters for video image.
Go to Configuration > Device Configuration > Image Parameters > Video.
To Next Page
Loading...
Need help?
General
