Network Traffic Camera • User Manual
42
Configure Video Overlay
Purpose:
You can configure the overlay information of the captured picture.
Go to Configuration > Device Configuration > Text Overlay > Video.
Capture Overlay Configuration
Configure the parameters below.
OSD Properties: the OSD information properties overlaid on the picture.
OSD Font Size: the font size of the overlay information.
Camera Name: Check it to display camera name on the picture.
Display Date: Check it to display date information on the picture.
Time Format: 24-hour and 12-hour are selectable.
Date Format: The date format overlaid on the picture.
Display Week: Check it to display week information on the picture.
Display Millisecond: Check it to display millisecond information on the picture.
Display Item: You can check display item(s) and enter information as need, to overlay them on
the picture.
Click Save to save the settings.
To Next Page
Loading...
Need help?
General
