Network Traffic Camera • User Manual
61
Chapter 13 Exception
Purpose:
The exception type can be HDD error, network disconnected, IP address conflicted, and vehicle
detector exception.
Go to Configuration > Device Configuration> Exception.
Select the exception type and the corresponding trigger methods.
Exception Settings
Notify Surveillance Center: Send an exception or alarm signal to remote management
software when an event occurs.
Trigger Alarm Output: Trigger one or more external alarm outputs when an event occurs.
Alarm Dwell Time(s): The waiting time for the alarm triggered. And you can set the alarm
dwell time from 0 to 180s.
Click Save to save the settings.
To Next Page
Loading...
Need help?
General
