HIKVISION Network Speed Dome - Maintenance; Rebooting the Speed Dome; Restoring Default Settings

User Manual of Network Speed Dome
© Hikvision
111
future.
Figure 10-9 Device Information
10.7 Maintenance
10.7.1 Rebooting the Speed Dome
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click to reboot the network speed dome.
Figure 10-10 Reboot the Device
10.7.2 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click or to restore the default settings.