Fingerprint Access Control Terminal·User Manual
25
2. Enter the new user name.
Notes:
For details about using the input method, see Appendix B Input Method Operation
The user name supports up to 32 characters.
Each user name can be used for once.
3. Enter the card No.
Notes:
The card No. is required.
The card No. can be 0.
The card No. can start with 0 when it contains more than one numbers. E.g. 012345.
The card No. can be used for once.
The device of DS-K1A801F series supports manually entering the card No. The device of
DS-K1A801MF and DS-K1A801EF series supports manually entering card No. and swiping
card to get the card No.
4. Move the cursor to Register and press the OK key scan the fingerprint.
Place the finger on the scanner, rise and confirm your fingerprint by following the voice
prompt.
Notes:
The same fingerprint cannot be repeatedly registered.
The same ID No. supports adding up to 10 fingerprints.
The device supports the optical fingerprint recording.
You can also scan the fingerprint via the external device and apply the fingerprint to the
device by the client software. (Device with the model of DS-K1T803MF(L) only supports
collecting or applying fingerprint pictures locally.)
For detailed information about scanning the fingerprint, see Appendix A Tips for Scanning
Fingerprint.
To Next Page
Loading...
Need help?
General
