HIKVISION UD06644B User Manual

Fingerprint Access Control Terminal·User Manual
26
5. Move the cursor to Set and press the OK key to edit the user password.
1) Enter the password and confirm the password in the Set Password interface.
2) Press the ESC key and select Yes to save the password.
Note: Up to 8 numbers can be entered.
6. Move the cursor to Select and press the OK key to select a department.
Figure 1. 2 Select Department Interface
Note: For detailed information about editing the department, see Section 4.6.1 Configuring
Department.

HIKVISION UD06644B Specifications

General

Brand	HIKVISION
Model	UD06644B
Category	IP Access Controllers
Language	English