Chapter 3
Trouble-shooting for the most common
anomalies.
3.1 Electrical system: what to do if. . .
The machine doesn’t switch on
1. The key is in position 0 ⇒ Rotate the key in position I.
2. The key microswitch is not properly
connected
⇒ Restore the proper connections.
3. The key microswitch doesn’t work ⇒ Replace the key microswitch (see section
4.1.1 at page 21).
4. The batteries don’t work properly ⇒ Refer to the proper section (see section
3.1 at page 10).
9
To Next Page
Loading...
