HI 800 145 E Rev. 2.00 (1334) 
All HIMA products mentioned in this manual are protected by the HIMA trade-mark. Unless noted otherwise, 
this also applies to other manufacturers and their respective products referred to herein. 
HIMax
®
, HIMatrix
®
, SILworX
®
, XMR
®
 and FlexSILon
®
 are registered trademarks of HIMA Paul Hildebrandt 
GmbH + Co KG. 
All of the instructions and technical specifications in this manual have been written with great care and 
effective quality assurance measures have been implemented to ensure their validity. For questions, please 
contact HIMA directly. HIMA appreciates any suggestion on which information should be included in the 
manual. 
Equipment subject to change without notice. HIMA also reserves the right to modify the written material 
without prior notice.  
For further information, refer to the HIMA DVD and our website at http://www.hima.de and 
http://www.hima.com. 
 
© Copyright 2013, HIMA Paul Hildebrandt GmbH + Co KG 
All rights reserved 
 
 
Contact 
HIMA contact details: 
HIMA Paul Hildebrandt GmbH + Co KG 
P.O. Box 1261 
68777 Brühl, Germany 
Phone: +49 6202 709-0 
Fax: +49 6202 709-107 
E-mail: info@hima.com 
 
Type of change 
Revision 
index 
Revisions 
technical  editorial 
1.00  Added: Configuration with SILworX  X  X 
1.01 
Deleted: Chapter Monitoring the Temperature State integrated in 
the system manual 
 X 
2.00  Revised: Chapters 3.4.1, 3.4.2, 3.5 and Table 7 
Added: F30 014, SIL  4 certified according to EN 50126, 
EN 50128 and EN 50129, Chapter 4.1.3 
X X