HIMA HIMatrix F30 011 - Tab DI 20: Channels; Table 26: Silworx - System Parameters for Digital Inputs, DI 20: Channels Tab

4 Start-up F30 01
Page 34 of 52 HI 800 145 E Rev. 2.00
4.3.2.2 Tab DI 20: Channels
The DI 20: Channels tab contains the following system parameters.
System parameter
Data
type
R/W Description
Channel no. --- R Channel number, defined by default
-> Error Code
[BYTE]
BYTE R Error codes for the digital input channels
Coding Description
0x01 Fault in the analog input module
0x10 Short-circuit of the channel
0x80
Intermittence between pulsed output DO and
digital input DI, e.g.,
 Open-circuit
 Open switch
 L+ undervoltage
-> Value [BOOL] BOOL R Input values for the digital input channels
0 = input de-energized
1 = input energized
Pulsed Output
[USINT] ->
USINT W Source channel for pulsed supply
Coding Description
0 Input channel
1 Pulse of the 1st DO channel
2 Pulse of the 2nd DO channel
… …
8 Pulse of the 8th DO channel
Table 26: SILworX - System Parameters for Digital Inputs, DI 20: Channels Tab