1 Introduction  F30 01 
Page 6 of 52  HI 800 145 E Rev. 2.00 
Additionally, the following documents must be taken into account: 
Name  Content  Document number 
HIMatrix System Manual 
Compact Systems 
Hardware description of the HIMatrix 
compact systems 
HI 800 141 E 
HIMatrix System Manual 
Modular System F60 
Hardware description of the HIMatrix 
modular system 
HI 800 191 E 
HIMatrix Safety Manual  Safety functions of the HIMatrix system  HI 800 023 E 
HIMatrix Safety Manual for 
Railway Applications 
Safety functions of the HIMatrix system 
using the HIMatrix in railway 
applications 
HI 800 437 E 
SILworX Communication 
Manual 
Description of the communication 
protocols, ComUserTask and their 
configuration in SILworX 
HI 801 101 E 
HIMatrix PROFIBUS DP 
Master/Slave Manual 
Description of the PROFIBUS protocol 
and its configuration in ELOP II Factory 
HI 800 009 E 
HIMatrix Modbus 
Master/Slave Manual 
Description of the Modbus protocol and 
its configuration in ELOP II Factory 
HI 800 003 E 
HIMatrix  
TCP S/R Manual 
Description of the TCP S/R protocol 
and its configuration in ELOP II Factory 
HI 800 117 E 
HIMatrix ComUserTask 
(CUT) Manual 
Description of the ComUserTask and its 
configuration in ELOP II Factory 
HI 800 329 E 
SILworX Online Help  Instructions on how to use SILworX  - 
ELOP II Factory  
Online Help 
Instructions on how to use ELOP II 
Factory, Ethernet IP protocol 
- 
SILworX First Steps 
Introduction to SILworX using the 
HIMax system as an example 
HI 801 103 E 
ELOP II Factory First Steps  Introduction to ELOP II Factory  HI 800 006 E 
Table 2:  Additional Relevant Documents 
The latest manuals can be downloaded from the HIMA website at www.hima.com. The revision 
index on the footer can be used to compare the current version of existing manuals with the 
Internet edition. 
1.2  Target Audience 
This document addresses system planners, configuration engineers, programmers of 
automation devices and personnel authorized to implement, operate and maintain the modules 
and systems. Specialized knowledge of safety-related automation systems is required.