Hioki 3561 - Page 114

7.5 Message List
108
Line Frequency
:SYSTem:LFRequency
50/ 60 Selects the AC line frequency 131
:SYSTem:LFRequency?
50/ 60 Queries the AC line frequency
selection
131
Key-Lock
:SYSTem:KLOCk
1/ 0/ ON/ OFF Sets the key-lock 131
:SYSTem:KLOCk?
ON/ OFF Queries the key-lock setting 131
EXT I/O Output
:SYSTem:ELOCk
1/ 0/ ON/ OFF Sets the external input terminal lock 132
:SYSTem:ELOCk?
ON/ OFF Queries the external input terminal
lock on/off setting
132
Local
:SYSTem:LOCal
Sets local control 132
Saving and Loading Measurement Setting States
:SYSTem:SAVE
<Table No.> Saves the measurement setting state 132
:SYSTem:LOAD
<Table No.> Loads a measurement setting state 132
:SYSTem:BACKup
Backups current measurement
configuration
132
Header Present
:SYSTem:HEADer
1/ 0/ ON/ OFF Sets header present 133
:SYSTem:HEADer?
ON/ OFF Queries the header present setting 133
ERR Output
:SYSTem:ERRor
SYNChronous/
ASYNchronous
Sets error output timing 133
:SYSTem:ERRor?
SYNChronous/
ASYNchronous
Queries the error output timing setting 133
Terminator
:SYSTem:TERMinator
0/ 1 Sets the terminator 133
:SYSTem:TERMinator?
0/ 1 Queries the terminator 133
System Reset
:SYSTem:RESet
Executes a system reset, including
saved measurement setting state data
134
EXT I/O
:IO:OUT
0 to 1023 EXT I/O output 134
:IO:IN?
0 to 31 EXT I/O input 134
Trigger
:INITiate:CONTinuous
1/ 0/ ON/ OFF Sets continuous measurement 137
:INITiate:CONTinuous?
ON/ OFF Queries the continuous measurement
setting
137
Message ([ ] = optional) Data Contents
( ) = response data
Description Ref
page