Hioki 3561 - Set and Query the Trigger Source; Enable;Disable and Query Trigger Delay

7.6 Message Reference
138
Set and Query the Trigger Source
Syntax
Command
:TRIGger:SOURce <IMMediate/ EXTernal>
Query
:TRIGger:SOURce?
Response <IMMEDIATE/ EXTERNAL>
IMMEDIATE .. Internal triggering
EXTERNAL... External trigger source. Triggering by
TRIG key,
TRIG
terminal or ∗TRG command.
Description
Command
Selects the trigger source.
Query Queries the trigger source selection.
Example
Command
:TRIG:SOUR IMM
Sets the trigger source to internal triggering.
Query
Response
:TRIG:SOUR?
IMMEDIATE
The trigger source is set to internal triggering.
Enable/Disable and Query Trigger Delay
Syntax
Command
:TRIGger:DELay:STATe <1, 0, ON or OFF>
Query
:TRIGger:DELay:STATe?
Response <ON or OFF>
ON........Trigger delay enabled
OFF......Trigger delay disabled
Example
Command
:TRIG:DEL:STAT ON
Enables trigger delay.
Query
Response
:TRIG:DEL:STAT?
ON
Trigger delay is enabled (ON).