Hioki PW3360-20 - 9.4 Auto Excel Graph Creation Application

9.3 Checking Recording and Measurement Data with Excel
137
3
Chapter 9 Analyzing Data on a Computer
9
THD
(PW3360-21
only)
THD (T
otal har-
monic distortion)
C
alculation selection
THD-F/ THD-R
Calculation selec-
tion ot the total har-
monic distortion
See: "Appendix4
Terminology" (p.
A6)
INTERVAL Save interval time
1sec/2sec/5sec/10sec/
15sec/30se
c/1min/2min/
5min/10min/15min/
20min/30min/60min
Save interval time
U RANGE Voltage range 600V
Voltage range set-
ting
Fixed at 600 V.
I RANGE Current range
5A/10A/50A/100A/500A
(when the 9661 sensor is
sele
cted)
Cur
rent range set-
ting
Varies with clamp
sensor typ
e.
If there are multiple
circuits, the current
range for each is
included.
SENSOR Clamp sensor
9660(100A)/9661(500A)/
9694(5
A)/9669(1000A)/9695-
02(50A)/
9695-03(100A)/
CT9667(500A)/
CT9667(5000A)/
9657-10(10A)/9675(10A)
Clamp sensor set-
ting
If there are multiple
circuits, the clamp
sensor for each is
included.
VT(PT) VT (PT) ratio
User-specified: 
0000.01 to 9999.99
Selected: 
1/60/100/200/300/600/
700/1000/2000/2500/
5000
VT (PT) ratio setting
CT CT ratio
User-specified: 0000.01 to
99
99.99
Selected: 
1/
40/60/80/120/
160/200/240/300/400/600/
800/1200
CT ratio setting
If there are multiple
circuits, the ratio for
each is included.
PULSE
Pulse input scaling 0.001 to 100.000
Pulse input scaling
settt
ing
Pulse
input aux unit p/n/u/m/none(space)/k/M/G/T
Pulse input aux unit
settting
Pulse
input unit
User-specified: 
ABCDE (5 characters)
Pulse input unit
settting
ENERGY

COST
Energy unit cost 0.00000 to 99999.9
Energy unit cost
settt
ing (/
kWh)
Energy cost cur-
rency
User-specified: 
ABC (3 characters)
Energy cost cur-
rency settting
Parameter Parameter name Format Description