1.5 On-Screen Indicators
19
3
1
Chapter 1 Overview
1.5 On-Screen Indicators
Marks Description
Lights up when the save destination is [SD CARD] and an SD
memory card is loaded in the instrument.
Lights red when the SD memory card is being accessed.
Lights up when the save destination is the instrument’s internal
memory
. Lights up when recording is started with the save destina-
tion set to [SD CA
RD] but no card inserted (in this case, data will be
saved to the instrument’s internal memory).
Lights red when the instrument’s internal memory is being
accessed.
Indicates that data is being sent or received over the LAN. (p. 161)
Indicates that data is being sent or received by the HTTP server
functio
n. (p. 163)
Indicates that data is being sent or received both over and LAN and
by th
e HTTP se
rver.
Indicates that data is being sent or received by the USB interface.
Indicates that recording and measurement are in progress.
Indicates that the instrument is standing by for recording and mea-
surement to start.
Indicates how much recording time remains on the SD memory
card or in
the
instrument’s internal memory.
Lights up when the voltage exceeds the peak.
Lights up when the current exceeds the peak.
Lights up when both the voltage and current exceed the peak.
Lights up when the key lock has been activated. (p. 14)
To Next Page
Loading...
