4.6 Factory Settings
82
All settings’ default values are as follows:
4.6 Factory Settings
Screens Settings Default value
MEAS 1
Wiring 3P4W
Frequency
Not set.
Select 50 or 60 Hz when the instrument is powered on for
the first time.
Current Sensor: Model 9661, Range: 500A, CT ratio: 1
MEAS 2
Voltage Range 600V fixed
VT (PT) ratio 1
PF/Q/S Calculation RMS
Energy cost Unit cost: 00
00.00/kWh, Currency
: Not set.
THD calculation
(PW3360-21 only)
THD-F (Distortion component/Fundamental wave)
REC 1
Save Destination SD card
Save Interval 5 minutes
Save Items
PW3360-20: AVG only
PW3360-21: AVG only (no hamonics)
Screen Save Off
Folder/ File Name Auto
REC 2
Recording start method Interval
Recording stop method Manual
SYS 1
Clock Set at time of shipment.
BEEP Sound On
LCD Backlight Auto Off
Phase Name ABC
Display color Color 1
Language
Not set. Select Japanese, English, or Chinese when the
i
nstru
ment is powered on for the first time.
SYS 2 Start Quick Set at power-on Off
LAN
IP Address 192.168.1.31
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
PULSE
Pulse Input
Filter Off
Scaling 001.000
Aux unit None
Unit Not set.
Pulse Output
Output rate 1 kWh
Pulse width 100ms FIX
To Next Page
Loading...
