2.4 Inserting (Removing) an SD Memory Card
30
Measurement data can be stored either on SD memory cards or in
the instrument’s internal memory. When saving data on an SD
memory card, insert an SD memory card and select [SD CARD] as
the storage destination on the [SET 3/8, REC 1] screen.
2.4 Inserting (Removing) an SD Memory Card
• Inserting a SD memory card upside down, backwards or in the
wrong direction may damage the instrument.
• Some SD memory cards are susceptib
l
e to static electricity.
Exercise care when using such products because static electric-
ity could damage the SD memory card or cause malfunction of
the in
strument.
Important
• Use only HIOKI-approved SD memory cards. Other SD
memory cards may not work with the instrument, and Hioki is
unable to guarantee proper operation.
• Format SD memory cards with the instrument. Using a com-
puter to format the card may reduce the card’s performance.
See: "Formatting the SD Memory Card or Internal Memory" (p.
127)
To Next Page
Loading...
