Hioki PW3360-20 - 3.1 Connection Procedure

3.1 Connection Procedure
42
Connect the instrument as follows:
3.1 Connection Procedure
1
Wiring diagram screen
Set the measurement conditions.
(p. 43)
3
Attach the clamp sensors.(p. 49)
4
Make connections.
(p. 51)
5
Make connections.
(p. 52)
2
Attach the voltage cords.(p. 47)
6
Wiring Check screen
Set the current range. (p. 54)
Check the wirings. (p. 56)