10.7 Remote Control of the Instrument by Internet Browser
166
You can restrict remote operation by setting a password.
Triggering a factory reset (p. 80) on the instrument will cause the
password to be reset to its default value of “0000.” The password
cannot b
e initialized by means of remote operation.
Setting a Password
1
Click [Password Setting] on the main page.
The following page will be displayed.
2
Enter the [Old Password], [New Password], and [Confirm New Pass-
word] fields and click the [SET] button.
Enter up to four English letters. If setting a password for the first time, enter “0000”
(four zeroes) as the
[Old Password]. If changing a previously set password, enter
the previously set password.
The new password will become effective immediately.
If You Forget Your Password
To Next Page
Loading...
