9.3 Checking Recording and Measurement Data with Excel
139
3
Chapter 9 Analyzing Data on a Computer
9
Measurement data header
Parameter Parameter name Description
Freq_xxx[Hz] Frequency
U1_xxx[V] Voltage RMS U1(CH1)
See: "5.4 Viewing Voltage
and Current Value
Details (RMS Val-
ues, Fundamental
Wave Values, Peak
Values, and Phase
Angles)" (p. A87)
U2_xxx[V] U2(CH2)
U3_xxx[V] U3(CH3)
U12_xxx[V]
U12(CH12)
For 3P3W2M wirings, value for third
channel as calculat
ed from U1 and U2
Ufnd1_xxx[V]
Voltage fundamental waveform value
U1(CH1)
See: "5.4 Viewing Voltage
and Current Value
Details (RMS Val-
ues, Fundamental
Wave Values, Peak
Values, and Phase
Angles)" (p. A87)
Ufnd2_xxx[V] U2(CH2)
Ufnd3_xxx[V] U3(CH3)
Ufnd12_xxx[V]
U12(CH12)
For 3P3W2M wirings, value for third
channel as calculat
ed from U1 and U2
Upeak1_xxx[V]
Peak value of the voltage waveform
(Absolute value)
U1(CH1)
See: "5.4 Viewing Voltage
and Current Value
Details (RMS Val-
ues, Fundamental
Wave Values, Peak
Values, and Phase
Angles)" (p. A87)
Upeak2_xxx[V] U2(CH2)
Upeak3_xxx[V] U3(CH3)
Upeak12_xxx[V]
U12(CH12)
For 3P3W2M connections, value for
third chann
el as calculated from U1
and U2
Udeg1_xxx[deg]
Voltage fundamental phase angle
U1(CH1)
See: 5.4, "Viewing Voltage
and Current Value
Details (RMS Val-
ues, Fundamental
Wave Values, Peak
Values, and Phase
Angles)" (p. 87)
Udeg2_xxx[deg] U2(CH2)
Udeg3_xxx[deg] U3(CH3)
Udeg12_xxx[deg]
U12(CH12)
For 3P3W2M connections, value for
third chann
el as calculated from U1
and U2