9.3 Checking Recording and Measurement Data with Excel
143
3
Chapter 9 Analyzing Data on a Computer
9
Measurement data
PFdem Power factor demand value The average value of the
power factor for each
time interval
PFdem1 to PFdem3
Power factor demand value, first cir-
cuit to third circuit
Power factor demand value for each
of th
ree 1
P2W circuits
Pulse Pulse input value
Pulse input count value
for each interval time x
scaling setting value
(including sub-units)
Parameter Parameter name Description
• For average value data, [Avg] is shown as [xxx].
• For maximum value data, [Max] is shown as [xxx].
• For minimum value data, [Min] is sh
own as [xxx].
• Units are shown in brackets after the parameter name.
• Average values are not available for volt
age and current peak
values.
• For current-only wirings, no average value is available for the
current fu
ndamental wave phase angle.
Data Data format Description
Normal data 12.345E+00 Outputs exponential data.
Invalid data 0.0000E+99
If the display reads [-----] and measurement is not
possible, outputs invalid data.
Example: With no input, it is not possible to measure
t
he powe
r factor (resulting in invalid data).
To Next Page
Loading...
