10.5 LAN Communications
160
Preparation items(provide either of the following)
When connecting the instrument directly to a computer
(when connecting the instrument to a computer)
Model 9642 LAN Cable (optional)
A 100Base-TX straight or cross
cable (up to 100 m in length)
1
Connect the LAN cable to the instrument’s LAN interface.
2
Connect the LAN cable to the computer’s 100Base-TX connector.
Since the instrument provides functionality for automatically
detecting whether a straight or cross cable is being used, a
straight cable may also be used. If you are unable to establish
communications with the computer, try a cross conversion cable
(9642 accessory).
To Next Page
Loading...
