12.4 Functional Specifications
193
Chapter 12 Specifications
12
Phase name R S T/A B C/L1 L2 L3/U V W
System reset
A system reset causes the instrument settings to be reset to their
default values. However, the time, language, frequency, IP address,
subnet mask, and default gateway are not reset.
LAN setting
IP address : 3 characters.3 characters.3 characters.3 characters
(***.***.***.***)
Subnet mask : 3 characters.3 characters.3 characters.3 characters
(***.***.***.***)
Default gateway: 3 characters.3 characters.3 characters.3 characters
(***.***.***.***)
MAC address : Written at time of shipment from factory.
Pulse output
Output rate:
OFF/1Wh/10Wh/100Wh/1kWh/10kWh/100kWh/1000kWh
Pulse width: 100ms
Pulse input
Filter : On/Off
Scaling : 0.001 to 100.000
Supplemental unit : p/n/μ(u)/m/
none/k/M/G/T
Unit (string) : Max. 5 byte characters
Setting screen
To Next Page
Loading...
