1.2 Features
13
3
1
Chapter 1 Overview
Safe design
Despite its compact footprint, the instrument features a safe design that is
CAT IV (300V) and CAT III (600 V) compliant.
Extensive line of clamp sensors
Choose the clamp sensor that’s right for your application, with models
designed for targets ranging from leakage currents to a maximum ranting of
5,000 A.
Ability to store data on SD memory cards
Used with a high-capacity, 2 GB SD memory card, the instrument can record
data continuously for up to one year.
Communications functionality
Instrument settings and data can be downloaded via the instrument’s USB
and LAN interfaces.
See: Chapter 10, "Using Communications (USB/LAN)" (p. 147)
Pulse I/O
Pulse input counts a pulse signal from an external source and saves the result
at a constant interval. Unit consumption management can be performed
based on power data and pulse counts (production volume). During recording
and measurement, pulse output is proportional to active energy.
See: Chapter 11, "Using Pulse Input and Output" (p. 167)
To Next Page
Loading...
