2.5 Supplying the Power
37
3
2
Chapter 2 Measurement Preparations
4
Connect the AC adapter’s output plug to the instrument.
Once the output plug is connected, route the cord underneath the hook (to keep it
from being pulled out).
5
Connect the voltage line power adapter’s banana plugs to the instru-
ment’s voltage input terminals.
6
Connect the voltage cords to the voltage line power adapter and to the
instrument’s voltage input terminals.
7
Connect the voltage cords to the metal part of the measurement lines.
See: 3.2, "Setting Measurement Condition
s on the Wiring Diagram Screen"
(p. 43)
See: 3.5, "Connecting the Voltage Cords to Lines to be Measured" (p. 51)
8
Turn on the voltage line power adapter’s power switch ( ).
9
Turn on the instrument’s power switch.
Connecting the voltage line power adapter’s banana plugs to the instrument’s volt-
age input terminals
Wirings
Model PW9003
1P2W/1P3W/1P3W1U/
3P3W2M/3P4W
3P3W3M
Black cord
The voltage input N terminal of
the PW3360
The voltage input CH2 terminal
of the PW3360
Red cord
The voltage input CH1 termi-
nal of the PW3360
The voltage input CH1 terminal
of the PW3360
Connecting the voltage cords to the voltage line power adapter and the instrument’s
voltage input terminals
Wirings
Voltage cord
1P2W
1P3W1U
1P3W
3P3W2M
3P4W 3P3W3M
Black N terminal of the PW9003 -
Red CH1 terminal of the PW9003
CH1 terminal of the
PW9003
Yellow -
The voltage input CH2 terminal of
the PW3360
N terminal of the
PW9003
Blue - -
The voltage input CH3
terminal of the
PW3360
The voltage input CH3
terminal of the
PW3360
To Next Page
Loading...
