2.6 Turning the Power On/Off
39
3
2
Chapter 2 Measurement Preparations
Powering Off
Turn the POWER switch OFF.
• If [QUICK SET at PWR ON] on
the [SET 6/8, SYS 2] sc
reen is
on, the Quick Set start dialog will
be displayed af
ter the self-test is
complete.
• If the instrument fails to turn on when using the AC adapter,
there may be a break in
the power cord or an AC adapter or
internal instrument malfunction. Contact your authorized Hioki
distributor or reseller.
• If an error message is displayed before the self-test completes,
there m
ay be an internal instrument malfunction. Contact your
authorized Hioki distributor or reseller.
To Next Page
Loading...
