4.3 Changing Recording (Save) Settings
75
3
Chapter 4 Changing Settings
4
Recording stop method
Sets the method used to stop recording.
Specifying a time
1
Move the cursor to the recording
start method, press the
[ENTER] key, and select
[TIME].
2
Move the cursor to the time set-
ting you wish to change and
press the [ENTER] key.
The cursor will change to the size of one
digit, and you will be able to change the
setting.
3
Change the setting with the cursor keys and then accept the
new value with the [ENTER] key.
Change other settings as necessary.
Selection
MANUAL Stops recording when the [START/STOP] key is pressed.
TIME
Selecting [TIME] causes a dialog box for setting the time to
be displayed. Recording is stopped at the set time (YY/MM/
DD hh:mm). If the set time has already passed when
recording is started, the “manual” stopping method is used.
TIMER
Recording is stopped automatically when the set timer time
has elapsed.
REPEAT
Recording is repeated while segmenting files every day.
Recording is stopped when the recording time period on
the repeat stop date ends. The stop method cannot be
changed during repeat recording.
To Next Page
Loading...
