Network Security > ACL > Assignment
Network Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
201
Table
Parameters Meaning
Group Name Displays the name of the Access Control List rule. The Access Control List
contains the rules.
Type Displays whether the Access Control List contains MAC rules or IPv4
rules.
Possible values:
mac
The Access Control List contains MAC rules.
ip
The Access Control List contains IPv4 rules.
You edit Access Control Lists with IPv4 rules in the
Network Security >
ACL
> IPv4 Rule
dialog. You edit Access Control Lists with MAC rules in
the
Network Security > ACL > IPv4 Rule
dialog.
Port Displays the port to which the Access Control List is assigned. The field
remains empty if the Access Control List is assigned to a VLAN.
VLAN ID Displays the VLAN to which the Access Control List is assigned. The field
remains empty if the Access Control List is assigned to a port.
Direction Displays that the device applies the Access Control List to received data
packets.
Priority Displays the priority of the Access Control List.
Using the priority, you specify the sequence in which the device applies
the Access Control Lists to the data stream. The device applies the rules
in ascending order starting with priority
1
.
Possible values:
1..4294967295
If an Access Control List is assigned to a port and to a VLAN with the same
priority, the device applies the rules first to the port.
Active Activates/deactivates the Access Control List on the port or in the VLAN.
Possible values:
marked
(default setting)
The Access Control List is active.
unmarked
The Access Control List is inactive.
To Next Page
Loading...