Hirschmann HiSecOS EAGLE20 - Page 202

Network Security > ACL > Assignment
Network Security
202
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
 Buttons
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Assign Opens the "Assign" dialog to assign a rule to a port or a VLAN.
 In the "Port/VLAN" field, you specify the device port or the VLAN ID.
 In the "Priority" field, you specify the source MAC address of the ARP
rule.
 In the "Direction" field, you specify the data packets to which the
device applies the rule.
 In the "Group Name" filed, you specify which rule the device assigns
to the port or VLAN.
Remove Removes the highlighted table entry.
Help Opens the online help.