Routing > Routing Global
Routing
278
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Information
Buttons
Parameters Meaning
Default TTL Displays the fixed TTL value
64
which the device adds to IP packets that
the device management sends.
TTL (Time To Live, also known as “Hop Count”) identifies the maximum
number of steps an IP packet is allowed to perform on the way from the
sender to the receiver. Every router on the transmission path reduces the
value in the IP packet by
1
. If a router receives a data packet with the TTL
value
1
, it discards the IP packet. The router reports to the source that it
has discarded the IP packet.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
To Next Page
Loading...