Hirschmann HiSecOS EAGLE20 - Page 46

Basic Settings > Load/Save
Basic Settings
46
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
 Information
Parameters Meaning
NVM in sync with
running config
Displays whether the configuration profile in the volatile memory (
RAM ) and
the “Selected” configuration profile in the non-volatile memory (
NVM ) are
the same.
Possible values:
 marked
The configuration profiles are the same.
 unmarked
The configuration profiles differ. The device saves changes
temporarily if, for example, you click on "Set" in a dialog while the
device is operating.
External memory in
sync with NVM
Displays whether the “Selected” configuration profile in the external
memory and the Selected configuration profile in the non-volatile memory
(
NVM ) are the same.
Possible values:
 marked
The configuration profiles are the same.
 unmarked
The configuration profiles differ.
Possible causes:
– No external memory is connected to the device.
– In the
Basic Settings > External Memory dialog, the "Auto-save
config on external memory" function is disabled.