7
English
DOUBLE INSULAT ION FOR SAFER OPERATION
To ensure safer operation of this po w er tool, HITACHI has adopted a double insulation design. “Double
insulation ” means that two physically separated insulation systems have been used to insulate the electrically
conductive materials connected to the power supply fro m the outer frame handled by the operator. Therefore,
either the sym bol “ ” or the words and “Double insulation ” appear on the po w er tool or on the na m eplate.
Although this system has no external grounding, you must still follow the normal electrical safety precautions
given in this Instruction Manual, including not using the po wer tool in wet environments.
To keep the double insulation system effective, follow these precautions:
* Only HITACHI A UTHORIZED SERVICE CE NTER should disassem ble or assemble this power tool, and only
genuine HITA CHI replacement parts should be installed.
* Clean the exterior of the po wer tool only with a soft cloth m oistened with soapy w ater and dry thoroughly.
* Never use solvent s, gasoline or thinners on plastic com ponents; otherwise the plastic m ay dissolve.
SAVE THESE INSTRUCTIONS
AND
MAKE THEM AVAILABLE TO
OTHER USERS OF THIS TOOL!
To Next Page
Loading...
Need help?
General
