Item Description
NIC Assigned
number
Shows a card type, controller number, scheduling
mode, port number, segment number, Virtual
NIC Number, and MAC address.
[Management module firmware version A0205 or
later]
Shows the number of a server blade in which the
card is installed and the card type in SMP
configuration.
USB Assigned
number
[Management module firmware version A0205 or
later]
Shows the type of a port.
Shows the number of a server blade in which USB
is installed and the port type in SMP
configuration.
Boot Mode [Management module firmware version A0205 or
later]
Shows a boot mode of the LPAR.
Note:
1. Shows the LPAR settings to add.
Table 2-129 Action button at the bottom
Item Description
Back Returns to the Add LPAR dialog box.
OK Save the settings and closes the Add LPAR (confirmation) dialog box.
Cancel Cancels settings and closes the Add LPAR (confirmation) dialog box.
• Boot order settings
[Management module firmware version A0125 or later]
With server blade model CB 520X, this setting is not available.
2-116
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
