Item Description
Warning: A warning was issued.
Unknown: The status is unknown.
Condition detail
1
Displays messages that describe the detailed
running status of LPAR Manager.
System firmware is starting.
This message indicates that EFI is starting.
Starting load f/w image and config files.
This message indicates that loading of LP
firmware has started.
Load *** function done.
This message indicates that various
settings files are being loaded.
(*** indicates the name of a function
being loaded.)
LP F/W Load completed.
This message indicates that loading of LP
firmware is completed.
Starting LP.
This message indicates that LPAR Manager
has started.
System Initializing
This message indicates that the LP system
is now being initialized.
System Ready
This message indicates that LPAR Manager
is running normally.
Firmware Version Displays the version of the assigned LP
firmware.
Bank Displays the assigned bank number.
LP license LP model Displays the LP model.
Essential or Advanced is displayed.
Essential:
Both the number of LPARs that can be
concurrently activated and the number of
processor groups that can be defined are
4.
(Processor groups 0 to 3 can be defined.)
Advanced:
Both the number of LPARs that can be
concurrently activated and the number of
processor groups that can be defined are
30.
(Processor groups 0 to 29 can be defined.)
Upper bound of
version
Displays the highest version of the supported
LP firmware.
Operating the Web Console
2-73
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
