103
Presentation tools
Connect the Hitachi Pen tablet or USB mouse to the USB TYPE A port on the
projector.
To save an image that has been drawn, a USB storage device must also be
connected to a USB TYPE A port of the projector.
If the projector only has one availabe USB TYPE A port, use a USB hub to
connect both devices.
In order to use the simple mouse function, connect the USB TYPE B port of the
projector with a USB (A) port of the computer with a USB cable.
Connecting the Devices
•
Some USB storage devices and/or USB hubs may not operate properly.
• Before removing the USB storage device from the port of the projector, be
sure to use the REMOVE USB function on the Thumbnail screen to secure your
data
(
95). If you do not run the REMOVE USB function and remove the USB
storage device, the time stamp may not be recorded correctly
.
USB storage device
Example of connections
NOTE
Hitachi
Pen tablet
USB mouse
USB hub
USB cable
Drawing function (continued)
To Next Page
Loading...
