14
STACK menu settings
NOTE
• After setting Main or Sub, the setting
information can be checked on Projector Web
Control. (
Network Guide → Projector Web
Control
)
Select Projector Status in the main menu of
Projector Web Control. The Stack Mode item
shows whether your projector is set to MAIN
or SUB even if STACK MODE is set to OFF.
3. Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. (
19
)
3.2 Selecting Main, Sub or off
To enable Intellectual Stack, select either MAIN or SUB. Intellectual Stack starts
when one projector is set to MAIN and the other is set to SUB in the STACK
MODE dialog. To disable Intellectual Stack, select OFF.
1. Highlight STACK MODE in the STACK menu with
the ▲/▼ buttons, then press the ► button to
display the STACK MODE dialog.
2. Use the ▲/▼ buttons in the dialog to highlight MAIN, SUB or OFF.
2)): Disables Intellectual Stack.
0$,1: Sets the projector to Main that functions as a control tower.
68%: Sets the projector to Sub that functions as a follower.
To Next Page
Loading...
