Hitachi CP-X8150 - Projector Status; Network Restart

41
3.1.12 Projector Status
Displays the settings and status of the projector.
Item 'HVFULSWLRQ
Error Status Displays the current error status
Lamp Time Displays the usage time for the current lamp.
Filter Time Displays the usage time for the current lter.
Filter Status
Displays the current cleanliness level of the air lter.
Power Status Displays the current power status.
Input Status Displays the current input signal source.
%ODQN2Q2II
Displays the current BLANK screen on/off status.
Mute Displays the current audio mute on/off status.
Freeze Displays the current Freeze status.
Shade Displays the current Shade status.
3.1.13 Network Restart
Restarts the projector’s network connection.
Item 'HVFULSWLRQ
Restart
Restarts the projector’s network connection in order to
activate new conguration settings.
• Restarting requires you to re-log on in order to further control or
congure the projector via a web browser. Wait 30 seconds or more after
clicking the [Restart] button to log on again.
NOTE
3. Web Control
3.1 Projector Web Control (continued)