Hitachi CP-X8150 - Projector Control

33
3.1.10 Projector Control
Item 'HVFULSWLRQ
MAIN
POWER Turns the power on/off.
INPUT SOURCE Selects the input source.
3,&785(02'( Selects the picture mode setting.
%/$1.212))
Turns the BLANK screen on/off.
MUTE Turns the audio mute on/off.
FREEZE Turns Freeze on/off.
MAGNIFY
Controls the magnify setting.
In some input signal sources, it might stop “Magnify” even
though it does not reach to maximum setting value.
0$*1,)<326,7,219 Adjusts the vertical magnify position.
MAGNIFY POSITION H Adjusts the horizontal magnify position.
TEMPLATE Turns template on/off.
6+$'(
Turns the lens shade on(closed)/off(opened).
ZOOM Adjusts the zoom setting.
FOCUS Adjusts the focus setting.
/(166+,)79 Adjusts the vertical lens shift.
LENS SHIFT H Adjusts the horizontal lens shift.
LENS MEMORY
Saves, Loads or Clears the lens memory data.
MY IMAGE Selects MY IMAGE data.
0<,0$*('(/(7( Deletes MY IMAGE data.
(continued on next page)
Operations of the projector can be performed
with the items on the screen.
The categories of the items are shown in the
main menu.
Most of the items have a submenu.
Refer to the table below for details.
• The setting value may not match with the actual value if the user
changes the value manually. In that case, please refresh the page by clicking
the [Refresh] button.
NOTE
3. Web Control
3.1 Projector Web Control (continued)